Engine - GM (19433160)
Genuine OEM GM® Parts & Accessories - 19433160
Details
- Brand:
- SKU:
19433160
- Description:
A DIY FOUNDATION FOR BIG TORQUE!
We offer the ZZ502/502 Base crate engine for the builder who wants the super-strong bottom end and high-flow aluminum oval-port cylinder heads, but also wants to finish the engine his or her way. It's a great foundation and it's up to you to make the most of it!
Like our complete ZZ502/502 Deluxe crate engine, a set of high-flow aluminum oval-port cylinder heads and a hydraulic roller camshaft designed to support low-rpm torque production enable it to hit the 500 lb.-ft. mark by approximately 2,500 rpm and hold it above the mark until around 5,000 rpm. It also features a latest-generation block casting with four-bolt main caps and an all-forged rotating assembly for exceptional strength and durability.
We rate the ZZ502/502 Base engine at 508 horsepower and 580 lb.-ft. of torque when it is finished with Chevrolet Performance aluminum intake manifold P/N 12363406 and Holley 870-cfm carburetor P/N 19170094. The other parts you need to complete the engine - including chrome dress-up parts - are available from
Chevrolet Performance.
TECH SPECS
Part Number: 19331576
Engine Type: Chevy Big-Block V-8
Displacement (cu in): 502
Bore x Stroke (in): 4.470 x 4.000
Block (P/N 19170540): Cast-iron with 4-bolt main caps
Crankshaft (P/N 10183723): Forged steel
Connecting Rods (P/N 19170198): Forged steel, shot peened
Pistons (P/N 12533507): Forged aluminum
Camshaft Type (P/N 12366543): Hydraulic roller
Camshaft Lift (in): .527 intake / .544 exhaust
Camshaft Duration (@.050 in): 224° intake / 234° exhaust
Cylinder Heads (P/N 19331425): Aluminum oval port; 110cc chambers
Valve Size (in): 2.250 intake / 1.880 exhaust; stainless steel
Compression Ratio: 9.6:1
Rocker Arms (P/N 12675724): Stamped steel
Rocker Arm Ratio: 1.7:1
Recommended Fuel: Premium pump
Ignition Timing: 32° Total at 4,000 rpm
Maximum Recommended rpm: 5,800
Balanced: External
Flexplate (P/N 10185034): 14"
INSTALLATION NOTES- Clutch linkage bosses are now drilled and tapped. When using cast-iron exhaust manifolds, lower head bolts may need to be replaced with bolts with shorter heads, for clearance
- 502 engines now have a mechanical fuel pump boss! NOTE: There is NO fuel pump lobe behind the boss.
- Comes with an externally balanced 14" automatic transmission flexplate. Use flywheel P/N 14096987 and 11" clutch assembly for manual transmission applications
- Designed for pre-1976 street vehicles or any off-road vehicle
- Not intended for marine applications
- Replaces:
12496963, 19331576, 19419002
Vehicle Fitment
| Year | Make | Model | Body & Trim | Engine & Transmission |
|---|
Also Purchased
Product Reviews
My GM Part
PRODUCTS ON OUR SITE should be viewed as a Catalog of Genuine GM OEM Auto Parts & Accessories. They are subject to availability and may be discontinued or have a superseded number without us having been updated by the manufacturer.
Some Parts are “On-Hand” or “in-stock” and come from our physical location. Others are sourced from our direct GM suppliers. On occasion, some items become unavailable or are understocked without our knowledge. GM provides us with updates continually, but this is not always reflected immediately on our store site.
We make every effort to communicate with you via email regarding any questions, updates or changes about your order throughout the process. If an item cannot be supplied, you will not be charged or a refund will be applied for that particular part or order as needed.
Shipping prices quoted on your final order may be subject to change based on actual packaging box size + delivery logistics. The dimensions x weight seen on a product page is for the actual part or accessory itself, not necessarily the packaging box used. This can affect the later shipping rate calculations. We make every effort to give you the best rate on your order and will consult with you on changes.
Orders with a VIN number provided are recommended and verified for accuracy.
Any illustration is a simple rendition of the part and where it is located on the vehicle; it is for reference only. Factors such as trim, color, and options are not depicted in the illustrations. Check with us if a part or accessory stock photo shows a color style to make sure what is ordered will be that color.
Product descriptions may say “Left” or “Right”. Left=Driver’s Side | Right=Passenger Side
We work constantly to update our site for accuracy, but some items displayed such as large auto body parts, hazardous materials, heavy parts and other delivery-dangerous products may not be available for shipping. We will email you about anything you ordered which will be too difficult to send safely and refund any order made in error.
- "On Hand" or In-stock orders ship out of our location within 24 hours; Weekend orders will be processed the next business day.
- If a part is not in stock but can be ordered from the manufacturer, it typically takes 2-3 days to arrive to us from area GM Hubs before we can deliver to you.
- Most orders of “on-hand” parts are shipped complete within 2-3 business days. Parts available but ordered from the manufacturer may take up to 5-6 business days to get to us and will be shipped to you immediately.
- Depending upon your location and our ability to source, ground shipments can take 2-14 days on average. We cannot guarantee transit times for ground and oversize orders.
- Your order may be shipped Expedited for an additional cost.
- Oversized shipments will be additional; you will be contacted prior to shipping for approval. Limited local pick-up from our SE Wisconsin location is available depending on the order.
- Shipping Carrier substitutions may be made at our determination in an attempt to reduce shipping cost to the customer.
- We do not ship internationally.
- In the event that a part has been placed on backorder or discontinued, we will do our best to try and find one for you as quickly as possible or refund your purchase for that item.
- We do not ship COD orders.
GM


